Inspect the workpiece and remove all nails and other foreign objects before beginning sawing. Do not operate a power tool when you are tired. When a tool is used outdoors, use only extension cords that are intended for outdoor use and are so marked. Do not carry a plugged in tool with your finger on the switch. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Ensure that you are trained in the use, adjustment and operation of the machine.ġ5.Keep the floor area around the machine level, well maintained and free of loose materials.Ensure that the arm is properly secure when bevelling.Do not use the saw without the guards in position, in good working order and properly maintained.Do not stare directly at the laser beam.īut only once it has been removed from the mains power and secured in the locked down position. These lasers do not normally present an optical hazard, although staring at the beam may cause flash blindness.

Safety rules for laser lights General safety instructions The laser light/laser radiation used in the GMC Redeye® system is Class 2 with maximum 1mW and 650nm wavelengths. Take special care to heed the Cautions and Warnings.

Carefully read through this entire Instruction Manual before using your new GMC Power Tool.

You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.

Introduction Description of symbols Your new GMC power tool will more than satisfy your expectations. 210MM (8 1⁄4”) SLIDE COMPOUND MITRE SAW WITH REDEYE ® SYT210 INSTRUCTION MANUAL 1 Black Cyan Magenta Yellow Code: SYT210 Date: 061010 Edition: 06 Op: PWĬontents Warranty Introduction Environmental protection Description of symbols Specifications Safety rules for laser lights General safety instructions Additional safety rules for mitre saws Accessories Know your product Unpacking Transportation Bench mounting Release knob Slide lock Mitre table locks Bevel lock Spindle lock button Rotating lower blade guard Dust bag Turning on and off Turning on the REDEYE® laser line generator Setting the table square with the blade Setting the fence square with the table

Gmc redeye compound miter saw manual